1965-67 Mustang Fuel Sending Unit – 5/16″ Inlet Tube

65-67 Mustang Gas Tank Fuel Sending Unit with 5/16 inch inlet65-67 Mustang Gas Tank Fuel Sending Unit with 5/16 inch inletWe are excited to add a new gas tank sending unit to our line up.All 1965 and 1966 Mustangs along with some 1967 models used a 5/16 inch fuel line, and we have a new sending unit in this size.This unit features enhanced accuracy due to tighter tolerances in the internal unit.It comes with the rubber o ring gasket, filter, and a brass float, like the original.Order here:https://www.virginiaclassicmustang.com/65-67-Mustang-Fuel-Sending-Unit-Enhanced-Accuracy-516-inch-inlet-tube-P482626.aspx…

65-66 Mustang Lower Control Arm – MOOG – Made in USA

 1965 and 1966 Mustang Front Suspension Lower Control Arm – MOOG – Made in USA ©Virginia Classic Mustang IncThey are back!We had a very special, limited run of these great lower control arms made, and they are now in stock!MOOG brand and Made in the USA. These are complete lower control arms with a very high quality ball joint properly riveted in along with the bushing on the mounting end.These front suspension lower arms are actually a great improvement over the originals and were previously unavailable. Thousands have been used over the years in applications from everyday drivers to Mustangs regularly used…

65-66 Mustang Drum to POWER Disc Brake Conversion Kit

 1965 and 1966 Mustang Drum to Power Disc Brake Conversion Kit for cars equipped with manual transmissions.©Virginia Classic Mustang IncWe have various Drum to Disc Brake Conversion Kits for Classic Mustangs, but there is one that we are always asked about and we have not had until now!The POWER Disc Brake Conversion Kit is now available for 1965 and 1966 Mustang equipped with the manual transmissions. Now you can easily add power disc brakes and maintain that factory original look.Click here to read more about this specific kit.Check out the below links in order to check out all of our…

1965 and 1966 289 High Performance (HiPo) Fan Spacer Bolts

 1965 and 1966 289 HiPo Fan Spacer BoltsWe are super happy to announce that we now have the correct 65-66 289 HiPo engine fan spacer bolts. These bolts have the proper “flag” headmarkings and are EXACTLY like the originals found on all 289 high performance engines including, of course, the GT350 Shelby.They are also made in the USA!Click here to order.Don’t forget! We also have the correct HiPo Fan Spacer. …

New Part! 1966 Early Emergency Flasher Switch with Complete Wiring Harness

We get asked all the time about this one! We now have the early style (before 3-1-1966) emergency flasher switch for the 1966 Mustang. This four way flasher switch wired up a bit differently than the later one and includes the complete wiring harness.We still have the later switch, which is made like the original in that it has the plug-in spade terminals on the back.Here are the links for both:1966 Mustang Early Emergency Flasher Switch with complete wiring harness1966 Mustang Late Emergency Flasher Switch with spade terminals  …

Gas Tank Sending Unit Lock Ring Tool

 Fuel Tank Sending Unit Lock Ring Removal Tool for Mustang©Virginia Classic Mustang IncThis is a tool that every classic Mustang owner should have in their tool box. It is made to “grab” the locking ring that holds in the fuel tank sending unit. This works way better and is much safer than using a flat blade screwdriver or punch along with a hammer.Here is the link:  Mustang Fuel Tank Sending Unit Lock Ring Removal ToolDon’t forget – We also, of course have a full line of Mustang Gas Tanks, Sending Units and related parts in stock!Fuel Tank Sending Unit Lock Ring…

Mustang Shop Manuals, Wiring Diagrams, Parts Manuals, Illustration Manuals – Now on USB Drives!

Mustang Colorized Wiring Diagrams on USB Flash Drive©Virginia Classic Mustang IncWe now have several Mustang reference manuals on handy USB Flash Drives!These drives are super convenient for transporting from device to device. It’s easy to zoom in on pages and print only the pages that you need.Check out a few of the links below to order:1965 and 1966 Mustang Wiring Diagrams1967 and 1968 Mustang Wiring and Vacuum Diagrams1969 and 1970 Mustang Wiring and Vacuum Diagrams1971, 1972, and 1973 Mustang Wiring and Vacuum Diagrams1965 and 1966 Mustang Shop Manuals1967 and 1968 Mustang Shop Manuals1969 and 1970 Mustang Shop Manuals1971, 1972, and…

Mustang Two-piece Idler Arms – Now Available!

1967-70 Mustang and Shelby – Original Style Two Piece Idler Arm Assembly – Power Steering©Virginia Classic Mustang IncWe now have the original style two piece idler arms available for the 1967, 1968, 1969, and 1970 Mustangs and Shelbys. They are available for both the power steering and manual steering equipped cars.You can order them by clicking on the links below:1967-70 Mustang and Shelby Original Style Two Piece Idler Arm Assembly – Power Steering1967-70 Mustang and Shelby Original Style Two Piece Idler Arm Assembly – Manual SteeringPlease note that we still have the one piece style (still includes the bracket) available…

New Shelby Mustang Shirts

New Shelby Mustang Shirts©Virginia Classic Mustang IncThey are here!!Our new Virginia Classic Mustang shirts featuring our 1965 GT350 Shelby Mustang. Great new art work on high quality t-shirts and heavy blend hoodies. Black with color art work.Click on of the links below for more information:T-ShirtHooded SweatshirtNew Shelby Mustang Shirts©Virginia Classic Mustang Inc …

1967 and 1968 Mustang Dash Pad

1967 and 1968 Mustang Dash Pad©Virginia Classic Mustang IncWe have really nice reproductions of the original 1967 and 1968 Mustang Dash Pads in stock, and we now have a new color!Dash pads for 1967 Mustangs in ’67 red are now available.The 1968 Mustangs used a much darker red (maroon) color for the interior and that one is available also.These dash pads are also available in Black, Blue, Aqua (Turquoise) and Ivy Gold.Click for more information.1967 and 1968 Mustang Dash PadAbove picture shows ’68 Dark Red (Maroon) and the ’67 “Brighter” Red©Virginia Classic Mustang Inc …